Thursday, March 14, 2013

Kitchen Cabinet:? Refacing, Replacing or refinishing

When it comes to kitchen remodeling projects, new appliances may be pricey and flooring costs may floor you, but kitchen cabinets a maximum cost of all. That is why it literally pays close look at what you have and consider choices carefully.

Depending on the configuration and construction of your closet, you can replace, refinish or reface them in the way your kitchen redo. Here is an overview of each approach to strengthening the bones of your kitchen.

Replacement kitchen cabinet - If your kitchen remodel involves a new trail and additional storage requirements, partial or complete replacement of kitchen cabinets is the way to go. Please note that this approach involves the demolition and consideration of critical factors such as pipe and tool placement.

There are three levels of customization cabinet:

Stock Cabinets: The cabinetry, stock cheapest mass produced and available through your local home improvement center and cabinet dealer. What you see is what you get, in some cases for changes or custom specifications. Manufacturers offer a range like that, however, stock cabinets can be the perfect solution to save cost as well.

Semi-Custom Cabinets: The middle way between stock and custom, many allow for slight changes (usually height, width, and depth) at the time of production. There is a broader range of relevant prints, trims and finishes are available, and of course, prices.

Custom cabinet: Made especially for you and your kitchen, with the price determined by the complexity of the design and materials used. Fond joinery difficult to consider other options.

Kitchen Cabinet Refacing - Kitchen Cabinet Refacing involves replacing the doors and veneer laminates for existing or wooden box. This is not a job for beginners, but also understand that if you hire a professional to do the job, your satisfaction with the results is directly proportional to the level of skill and expertise. The quality of existing cabinets and new material applied also affects the final product.

Kitchen Cabinet Refinishing - If you like the style and configuration of the kitchen cabinet, and they happen to be made of wood or laminate, refinishing them is the most obvious route to control the cost of renovation. Cabinetry oldest well-developed, so keeping them is often useful just to be sure to check out the construction carefully before taking the sander, because if the paper-thin veneer covering every surface but solid front, you need to rethink your plan refinishing. Veneers are not sanded or stained, so painting is the only option if they are involved. Is painting or staining, choose oil-based finish, which is much more durable and forgiving of everyday kitchen clutter than latex finish.

Checking your kitchen cabinets and clear to approach this? Excellent! Here are the steps to complete a spectacular new:

Work in a well-ventilated area, start with a thorough cleaning, remove all the dirt and chaos of the cabinet, allowing the surface to dry.

Apply paint / finish remover and scrape away with a putty knife after, followed by a wire brush. Continue this cycle until the surface is clean of timber revealed.

Cabinet to fine sand-grit sandpaper to, and remove dust and debris generated by the fabric tactics. You can also consider using liquid sanding agents, which can be very effective in the application for fine woodworking detail and other areas hard sand (also helps Refinishing removal mess-step).

Apply a new finish in accordance with manufacturer's instructions (along with the appropriate primer if you are painting the cabinet), which allows the surface to dry completely between coats.

When a complete application is complete, apply a protective top coat to protect the cabinet from moisture, lubricants and surface.

Finally, to complement your kitchen cabinets Refacing or refinishing makeover, do not forget to update all the buttons and pull. New hardware bling that brings originality and personality to the kitchen!

1 comment:

  1. Thank you for sharing this information. The information was very helpful and saved a lot of my time.